Description of the system components
98-143492-D
Chapter 2: Introduction
2-5
Introd
ucti
on
Keypad and display
The display has a two line menu system and two status lines (Upper and Lower) for
compact satellite and antenna information. Using the keypad and display you can deploy,
stow and stop the antenna, including monitoring the system (warnings, errors and
information). See
on page 4-17 for a list of menus. The menus show how
the system has been configured. The three LED light indicators are described in
on page 5-13. You can see warnings, errors and
information messages in the display. Signal strength is indicated on the display as 7 blocks.
The signal strength is also displayed as a number during manual pointing.
2.2.5
Web interface for setup and troubleshooting
To fully configure the EXPLORER 5075GX, use the built-in web interface. Installation of
software is not necessary, you can use a standard Internet browser. The web interface is
mainly used for first-time setup, including WLAN use and administrating access rights
(admin and guest). You can deploy, stow and stop the antenna, including monitoring the
system (warnings, errors and information), with the web interface.The web interface is
useful when troubleshooting the EXPLORER 5075GX, for example to download a
diagnostics report. The web interface can be accessed using WiFi. For details about network
configuration see
Figure 2-6: Keypad and display (example)
Figure 2-7: Web interface, DASHBOARD (example)
