background image

Setup with the web interface for PC

4-12

Chapter 4:  Setup and operation

98-143492-D

The Administration page is now updated to let you change the user name and password 
or log off Administration.

To change the administrator password, do as follows:

1. In the section 

Change Logon

 enter the current password.

2. Type the new password and retype it on the next line.

3. Click 

Change

. At the next logon the new password is required.

To reset the administrator password, do as follows:

1. Contact your service partner for a reset code. Report the serial number of the unit. You 

find it in the 

Dashboard, ACU serial number

.

2. Click the link 

Forgot administrator password?

 on the 

LOGON

 page.

3. Type in the reset code obtained from your service partner and click 

Reset

.

4. Type in the user name 

admin,

 the password 

1234

 (default) and click 

Logon

.

To log off administration

If you have not entered anything for 30 minutes under 

ADMINISTRATION

, you are 

logged off automatically. To log off manually, click 

Logoff

.

4.1.8

User permissions (guest login)

You can manage user access to certain functions of the EXPLORER 5075GX system. You can 
allow or deny users that are not administrators (user name: guest, password: guest) access 
to certain functions and make these pages read-only. This is useful if you want to protect 
the system against unintended changes or tampering of the system.

Figure 4-9: Web interface: Administration, change administrator logon and password

Important

Study this screen thoroughly and decide which areas of the EXPLORER 
5075GX system you want to give non-administrator users (user name: 
guest) access to.

Summary of Contents for EXPLORER 5075









































































Reviews: