manualshive.com logo in svg

COBHAM EXPLORER 5075, User & Installation Manual

Share
Download
COBHAM EXPLORER 5075 User & Installation Manual Download Page 63

List of events

98-143492-D

Appendix B:  System messages

B-3

System messages

08841-0

ADM ERROR

Tuner lock

The internal tuner PLL was unable to lock.

08842-0

ADM WARNING GSC demodulator

The GSC demodulator has reported an error.

08843-0

ADM WARNING DVBS demodulator

The DVBS demodulator cannot be initialised 
and loaded correctly.

08844-0

ADM WARNING BUC voltage

The BUC voltage is out of range.

08845-0

ADM WARNING LNB voltage

The LNB voltage is out of range. The LNB might 
be switched off to protect the power supply 
circuitry. Reactivate satellite profile to try 
again, check LNB cable and surroundings if the 
problem persists.

08880-0

ADM ERROR

WLAN configuration error Configuration of WLAN module failed.

08A00-0

ADM WARNING GX Core Module fan

There is a problem with the Core Module fan. 
Check/clean and replace if necessary.

08A01-0

ADM WARNING GX Core Module heater

There is a problem with the Core Module 
heater. Check and replace if necessary.

08A02-0

ADM WARNING GX Core Module 

temperature

The Core Module temperature is out of range. 
It may affect performance, and it will be shut 
down if the situation gets worse.

08A03-0

ADM ERROR

GX Core Module power

The Power Good signal from the Core Module 
is low. Check cables.

08A04-0

ADM WARNING iDirect modem

The ACU detected a warning/error in the 
iDirect modem. Log into the modem for more 
information. Info: 
0x00000001: Temperature error        
0x00000002: Test error        
0x00000004: Fan error

09000-0

KDM ERROR

KDM 3V3 supply

Internal 3V3 voltage supply error in the KDM. 

09001-0

KDM ERROR

KDM 12V supply

Internal 12V voltage supply error in the KDM. 

09002-0

KDM ERROR

KDM display

Display hardware error in the KDM. 

09010-0

KDM ERROR

KDM link/SW version

Link to the KDM module could not be 
established. Either the KDM board is 
malfunctioning, or - if the system software has 
just been updated - the software is too old and 
is not compatible with the KDM hardware. 

Error code 

(ID)

Severity

Description

Explanation

Table B-1: Event messages (Continued)

Summary of Contents for EXPLORER 5075









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands