Setup with the web interface for PC
98-143492-D
Chapter 4: Setup and operation
4-9
Setup a
nd op
eration
4.1.5
To deploy, stow, stop or jog the antenna
You can deploy, stow and stop the antenna using the web interface or the keypad. You can
jog the antenna using the web interface. The function Jog moves the antenna in azimuth
and elevation.
With keypad and display
1. Press
OK
to scroll to the
Command
page and press
OK
again to access page.
2. Press
until
Stop
/
Deploy / Stow
is selected, and press
OK
to initiate the selection.
What to expect during deployment:
The antenna system starts up and goes through a brief initialization procedure:
POWERING UP
ANTENNA POST
ACQUISITION OK
When Stow is selected the antenna goes into its stow position.
With the web interface
1. Connect a PC to the LAN1 connector.
2. Open an Internet browser and type the default IP address: http://192.168.0.1
,
user name
admin
and the password
1234
.
3. To deploy, stow or stop the antenna click the button
Deploy
,
Stow
or
Stop
in the top
bar.
•
Deploy
: Prepare the antenna for pointing after it has been stowed, stopped or
jogged.
•
Stow
: Stow the antenna before disassembly.
•
Stop
: Stop the antenna immediately.
To jog the antenna do as follows:
1. Click
SERVICE > Jog
.
2. Click the button
Activate jog
. To jog the antenna, homing must be finished.
3. Wait for Status to show
Jogging...
Figure 4-7: Web interface: Service > Jog
