Setup with the web interface for PC
4-12
Chapter 4: Setup and operation
98-143492-D
The Administration page is now updated to let you change the user name and password
or log off Administration.
To change the administrator password, do as follows:
1. In the section
Change Logon
enter the current password.
2. Type the new password and retype it on the next line.
3. Click
Change
. At the next logon the new password is required.
To reset the administrator password, do as follows:
1. Contact your service partner for a reset code. Report the serial number of the unit. You
find it in the
Dashboard, ACU serial number
.
2. Click the link
Forgot administrator password?
on the
LOGON
page.
3. Type in the reset code obtained from your service partner and click
Reset
.
4. Type in the user name
admin,
the password
1234
(default) and click
Logon
.
To log off administration
If you have not entered anything for 30 minutes under
ADMINISTRATION
, you are
logged off automatically. To log off manually, click
Logoff
.
4.1.8
User permissions (guest login)
You can manage user access to certain functions of the EXPLORER 5075GX system. You can
allow or deny users that are not administrators (user name: guest, password: guest) access
to certain functions and make these pages read-only. This is useful if you want to protect
the system against unintended changes or tampering of the system.
Figure 4-9: Web interface: Administration, change administrator logon and password
Important
Study this screen thoroughly and decide which areas of the EXPLORER
5075GX system you want to give non-administrator users (user name:
guest) access to.
