1
BBG-1070-QS Functional Description
1-10
BBG-1070-QS PRODUCT MANUAL
BBG1070QS-OM (V1.8)
Cascade Config (Configurator) DashBoard Control
Consolidation
(See Figure 1-3.) The
Cascade Config
DashBoard tabs and multi-unit network
connection allows cascade chain network-connected BBG-1070-QS units to
communicate with each other and expose settings and attributes from all of
the units within the chain. In this setup, each unit will “see” the other units in
the network chain connection, with access to PiP controls for all PiPs from
any unit within the chain.
This global consolidation allows setup control of any of the PiPs from one
unit. Settings can be performed on one PiP, and then be cloned across as many
PiPs in the chain as desired. This removes the need to set up each unit
individually, with settings manually repeated for several units. It also allows
presets that can “look at” and set up all the units in the chain from a single
preset.
Figure 1-3 Example Cascade Config Connection and Functionality
-Q
S
“A
”
-Q
S
“B
”
-Q
S
“C
”
-Q
S
“D
”
PiP 1-5
Video In
PiP 6-9
Video In
PiP 10-13
Video In
PiP 14-17
Video In
Cascade Underlay
10
.99
.11
.1
10.
99.1
1.2
10
.9
9.
11
.4
10
.99
.11
.3
Multi-Viewer
Video Out
DashBoard
Remote
Control
Cascade Config
DashBoard tabs and multi-unit network connection allows cascade chain network-connected BBG-1070-QS units
(BBG-1070-QS units “A” thru “D” in this example) to communicate with each other and centrally expose setup attributes of all of the units
within the chain.
Cascade Config is designed to use the first unit as a full quint-split processor, with subsequent units in the chain taking in the cascade
underlay as
In E
and additional PiP inputs as
In A
thru
In D
. In this example, a 17-input multiviewer is attained
(four units providing 5+4+4+4 = 17 input channels).
BBG-1070-QS units within the chain (equipped with Ethernet-
port rear modules) are connected to a shared network. This
allows the units to “see” each other, with each unit exposing
control attributes for all the units.
For each per-PiP control, the result is all PiPs within the chain being exposed, allowing
settings to be performed from any of the units and cloned to any unit as desired. User
presets can encompass all units in the chain and be invoked in a single action done at
one unit.
Cascade Config Attribute
Sharing Across Network
SCPD2014-27
