3
BBG-1070-QS Function Menu List and Descriptions
3-18
BBG-1070-QS PRODUCT MANUAL
BBG1070QS-OM (V1.8)
(continued)
• PiP Custom Positioning Controls
Controls allow the positioning and sizing of the PiP within the overall
merged output image.
• Position Vertical and Position Horizontal sets the PiP origin location
(Vertical in lines; horizontal in pixels)
• Width and Height sets the PiP size
(Vertical in lines; horizontal in pixels)
)
The PIP Size display shows the PiP size and H/V origin point position.
Note: Even if a PiP layout QuickSet was applied, these controls allow
manipulating PiP position and size as desired.
Table 3-1
BBG-1070-QS Function Menu List — continued
PiP 2 with custom positioning/sizing placed in normal
upper-right corner of merged quint-split output
PiP 2 with new custom positioning/sizing now places PiP 2 in
lower-left corner (over PiP 3) of merged quint-split output
When using custom positioning, it is helpful to first size all the PiP small (as
thumbnail sized). This helps avoid a PiP “hiding” underneath another PiP.
Pressing the Identify PIPs button as shown here will help make sure each
PiP input correlation is known, and all PiP are present as expected.
With the PiP identities now known, one-by-one each PiP can
be sized and positioned to its desired size/position as shown in
the example here.
