3
BBG-1070-QS Function Menu List and Descriptions
3-58
BBG-1070-QS PRODUCT MANUAL
BBG1070QS-OM (V1.8)
(continued)
• Log Status and Download Controls
Admin (Log Status/Firmware Update)
• Log Status indicates overall internal operating status.
• Download Log File allows a operational log file to be saved to a
host computer. This log file can be useful in case of a error or in the
case of an operational error or condition. The file can be submitted
to Cobalt engineering for further analysis.
• Thermal Shutdown enable/disable allows the built-in thermal
failover to be defeated. (Thermal shutdown is enabled by default).
CAUTION
The BBG-1070-QS FPGA is designed for a normal-range operating
temperature around 85° C core temperature. Operation in severe
conditions exceeding this limit for non-sustained usage are within
device operating safe parameters, and can be allowed by setting this
control to Disable. However, the disable (override) setting should be
avoided under normal conditions to ensure maximum protection.
• Card Network Setup Controls
Note: The IP address setting here is independent of a frame IP typically
used for DashBoard or other frame/device remote control.
• Addressing Mode allows setting address to static (user) address or
via DHCP (where a DHCP server is available for the connection).
• Static IP Address, Static Subnet Mask, and Static Default
Gateway fields allow setting IP parameters when Static mode is
selected.
• Card Active IP shows the currently configured IP address (whether
static or DHCP).
• Card Check and Restore Utilities
Memory Test allows all cells of the device FPGA memory to be tested.
This control should only be activated under direction of
product support. Exercising the memory test is not part of
normal device maintenance.
Restore from SD Card allows device rendered inoperable to be restored
using an SD memory card fitted to the device internal SD slot.
Product support must be contacted prior to performing this
operation. Use of any SD card not supplied by support can
corrupt the device.
Table 3-1
BBG-1070-QS Function Menu List — continued
