3
BBG-1070-QS Function Menu List and Descriptions
3-10
BBG-1070-QS PRODUCT MANUAL
BBG1070QS-OM (V1.8)
Note:
Some control descriptions in this section are also contained in “BBG-1070-QS
Operator’s Guide” and are repeated here for convenience. It is however
recommended that operators use BBG-1070-QS Operator’s Guide (included
with this product) for using the BBG-1070-QS rather than this manual.
Table 3-1
BBG-1070-QS Function Menu List
Select inputs to be applied to each PiP. Also provides
controls for using Cascade Mode (where required).
Input Routing
• PiP Input Source Select
Routes the SDI inputs (VID IN A thru VID IN E as In A thru In E,
respectively) to the respective PiP input.
(In this example, VID IN A thru VID IN E are respectively routed as PIP 1
thru PIP 5 input sources.)
Note: A CVBS input is automatically detected by the unit input, with the
CVBS ADC converter automatically engaged.
• Identify PIPs Button
Pressing this button momentarily displays an overlay on each PiP image
that correlates the PiP to its PiP identity. This control is useful if you “lose
track” of which displayed PiP correlates to which PiP input channel.
Pressing Identify PIPs shows the PIP assignment in the merged
output (display ceases after about 3 seconds)
