CONTROLLER DIAGNOSTIC TOOL (CDT)
Monitor Menu
11
CHARGER INHIBIT
Displays charger connection. When the charger is connected and the controller does not drive (inhibited), the handset
indicates ON. When the charger is not connected and the controller is allowed to drive, the handset indicates OFF.
LED DRIVER
Displays the present state of pin 11 in the controller 16-pin connector that operates the charge indicator light on the
dash. When pin 11 is activated, power is provided to the light and the handset indicates that the LED Driver is ON.
When pin 11 is not activated, the handset indicates that the LED Driver is OFF.
ODOMETER
Displays approximate distance travelled in miles.
BDI INFO
Load Line SOC
Load Line SOC is the state of charge estimation based upon battery voltage during a defined discharge current
(between 50 and 60 amps).
Load Line Valid
Load Line Valid is an indication (Load Line Valid = 1) that the discharge current is between 50 and 60 amps.
BDI Int Factor
BDI Int Factor is an auto-adjusting correction factor for estimating state of charge based upon the difference between
the currently estimated state of charge and the Load Line SOC.
Open Circuit Voltage Start
Open Circuit Voltage Start is the voltage, as determined by the controller, following a cycle of the Run/Tow switch or
coming out of sleep mode.
Open Circuit SOC Start
Open Circuit SOC Start is the estimated state of charge following a cycle of the Run/Tow switch or coming out of
sleep mode.
BATTERY MONITOR
These menu items reset every time the vehicle is charged.
Lowest Battery Voltage
Displays the lowest battery pack voltage reached since the last charge.
I Batt at Lowest Volts
Displays the current through the controller at the lowest battery pack voltage.
Highest Battery Voltage
Displays the highest battery pack voltage after being charged.
CHARGING TOTALS
These menu items accumulate totals for the life of the vehicle.
Completed Charges
Displays the number of completed charge cycles.
Interrupted Charges
Displays the number of interrupted charge cycles.
2019 Transporter Maintenance and Service Manual
Page 11-15
Summary of Contents for TransPorter 4
