TRANSAXLE (TYPE G)
Transaxle Disassembly, Inspection, and Assembly
2004 Precedent IQ System Golf Car Maintenance and Service Manual
Page 16a-9
16A
8.4. Remove the differential pin (31) by pushing pin through differential gear case from one side
(Figure 16a-5, Page 16a-3)
.
See also Figure 16a-15, Page 16a-9.
8.5. Remove the idler gears and thrust plates (1 and 2)
(Figure 16a-16, Page 16a-9)
.
8.6. Remove the differential gears and thrust plates (3 and 4).
8.7. Inspect the bearings (13) of the differential case (26) and replace them if they are damaged
(Figure 16a-5, Page 16a-3)
. To remove them, press them off.
See following CAUTION.
CAUTION
• Do not reuse bearings after removing them. Replace bearings with new ones.
9. Inspect parts for wear or damage. Any worn or damaged parts should be replaced.
See following NOTE.
NOTE:
Damaged or worn gears should be replaced as sets.
Figure 16a-14 Separate Housing
Figure 16a-15 Differential Pin
Figure 16a-16 Left Differential
DIFFERENTIAL
PIN
DIFFERENTIAL
GEAR
LEFT
DIFFERENTIAL
GEAR
CASE
3
4
1
2
