STEERING AND FRONT SUSPENSION
Rack and Pinion
2004 Precedent IQ System Golf Car Maintenance and Service Manual
Page 7-7
7
Rack and Pinion Disassembly, Continued:
10. If the ball bearing (4)
(Figure 7-5, Page 7-6)
has been damaged, remove the c-type stop ring (3) and
press the bearing off
(Figure 7-9, Page 7-7)
.
11. Inspect the bushing (7) and needle bearing (6) for excessive wear. If wear is excessive, replace the entire
assembly
(Figure 7-5, Page 7-6)
.
12. Inspect the ball joints (8) for wear. If one or both of the ball joints (8) are excessively worn, remove and
replace the ball joint from the rack (18).
13. Remove the rack (18) from housing (17).
Figure 7-6 Remove Dust Seal
Figure 7-7 Pinion Snap Rings
Figure 7-8 Remove Pinion from Housing
Figure 7-9 Remove Bearing from Pinion
4
PRESS RAM
PINION GEAR
BEARING
