![background image](http://html1.mh-extra.com/html/club-car/carryall-500/carryall-500_maintenance-and-service-manual_2626769383.webp)
ENGINE (SUBARU EX40)
Flywheel
22
2.
Hold flywheel (4) only, not fan (7), with strap wrench (5) and use a 24 mm socket to remove flywheel nut (8) and
flat washer (9) by turning it counterclockwise
.
See following CAUTION.
CAUTION
• The flywheel nut has right-hand threads. Turn it clockwise to tighten, or counterclockwise to loosen.
• Do not damage the fan blades with the strap wrench. Do not place screwdriver or pry bar in the
fan blades.
3.
Temporarily install flywheel nut (8) onto end of crankshaft to protect threads and to prevent flywheel (4) from
falling off while being pulled.
4.
Detach flywheel (4) from crankshaft with a large, two-jaw puller.
5.
Remove flywheel nut (8) and flywheel (4) from crankshaft.
6.
Remove woodruff key (10) from groove in crankshaft.
5
7
4
M
F
34
81
1
3
M
F
34
81
532
Figure 22-9
Flywheel Nut Removal
533
Figure 22-10
Fan and Flywheel Installation
FLYWHEEL INSTALLATION
1.
Wipe off any oil on tapered portions of crankshaft and flywheel (4)
.
2.
Insert woodruff key (10) into keyway of crankshaft. Then align groove in flywheel (4) to woodruff key (10) and
push flywheel onto crankshaft until it seats. Install and fan (7), flat washer (9), and nut (8) finger-tight.
3.
Use a strap wrench (3) to keep flywheel and fan assembly (1) from turning while tightening flywheel nut to 80
ft·lb (110 N·m)
See following CAUTION.
CAUTION
• The flywheel nut has right-hand threads. Turn it clockwise to tighten, or counterclockwise to loosen.
• Be careful not to damage the fan blades. Use a strap wrench to hold flywheel. Do not place screwdriver
or pry bar between fan blades.
4.
Install fan housing (2) and tighten screws (1) to 90 in·lb (10 N·m)
2017 Carryall 500 and 700 Maintenance and Service Manual
Page 22-11
Summary of Contents for Carryall 500
