20
Starter/Generator
ELECTRICAL COMPONENTS: PEDAL-START
GAS VEHICLE
Figure 20-5
Pull Brushes Away From Center of the Commutator End Cover
DISASSEMBLY OF THE STARTER/GENERATOR TO SERVICE THE
ARMATURE/COMMUTATOR
1.
Remove the commutator end cover to prevent damage to the brushes and armature.
Starter/Generator to Service the Brushes on page 20-1.
2.
To separate armature and output end cover assembly from the field coil housing, first remove the two securing
bolts (43). Carefully remove armature and output end cover assembly from the field coil housing so components
are not damaged.
3.
To separate armature (33) from output end cover (36), remove nut (41), lock washer (40), pulley (39). It may be
necessary to use the wedge attachment tool (P/N 1012812) to remove the pulley from the shaft.
4.
Remove the internal retaining ring (32) to release the bearing (35) and armature (33) from the output end cover
(36).
Page 20-4
2017 Carryall 500 and 700 Maintenance and Service Manual
Summary of Contents for Carryall 500
