18
Test Procedures
TROUBLESHOOTING AND ELECTRICAL
SYSTEM: PEDAL-START GAS VEHICLE
4.
5-amp ATM Fuse Only:
With the key switch in the ON position:
4.1.
Probe the two, small metal contacts on the top of the fuse
4.2.
Each contact should show battery voltage.
4.3.
If only one side shows battery voltage, replace fuse.
4.4.
If neither side of a fuse shows battery voltage, inspect the following locations:
– 12-pin dash wire harness connector, key switch and sonic weld 3.
5.
2-amp ABC Glass Fuse Only:
With the key switch in the ON position:
5.1.
Probe the wire on each side of the fuse with insulation-piercing probes.
5.2.
Each probe should show battery voltage.
5.3.
If only one side shows battery voltage, replace fuse.
5.4.
If neither side of a fuse shows battery voltage, inspect the following locations:
– 5-amp ATM fuse, 12-pin dash wire harness connector, key switch and sonic weld 3.
Page 18-20
2017 Carryall 500 and 700 Maintenance and Service Manual
Summary of Contents for Carryall 500
