![background image](http://html1.mh-extra.com/html/club-car/carryall-500/carryall-500_maintenance-and-service-manual_2626769162.webp)
11
Connection Tests
CONTROLLER DIAGNOSTIC TOOL (CDT)
1.3.
Connect the handset cord to the handset.
1.4.
Connect the other end of the handset cord (without the adapter) to the four-pin connector of the speed
controller.
1.5.
Connect the vehicle batteries, positive (+) cable first.
If the handset does not function during Test Procedure 3A, but does function when connected directly to the speed
controller, the handset cord adapter and vehicle wire harness should be thoroughly tested.
Handset Cord Adaptor on page 11-29.
The CDT ports and connections should also be thoroughly checked. Section
12 — Electrical System Troubleshooting: IQ Plus Electric Vehicles
Figure 11-3
Disconnect Four-pin Connector.
Page 11-30
2017 Carryall 500 and 700 Maintenance and Service Manual
Summary of Contents for Carryall 500
