21
Key Switch
ELECTRICAL COMPONENTS: KEY-START
GAS VEHICLE
4.
From the back of the instrument panel, push down on the retaining tabs surrounding the key switch (3) and
remove the key switch cap (6). Using a 1-inch socket, hold the key switch (3) and remove the switch retaining nut
(5) from the outside of the instrument panel
.
KEY SWITCH INSTALLATION
1.
Position the key switch (3) and key switch washer (1) in the instrument panel, then install and tighten the key
switch nut (5) to 35 to 45 in·lb (4 to 5 N·m). Install key switch cap (6) into instrument panel, align the bent washer
tab with the slot in the plastic.
2.
Refer to the wiring diagram to connect the wires to the key switch terminals.
See Wiring Diagrams, Section 19,
3.
Install instrument panel.
See Instrument Panel Installation on page 4-10.
4.
Connect the battery and spark plug.
6
5
1
2
3
4
2931
Figure 21-1
Key Switch
Page 21-2
2017 Carryall 500 and 700 Maintenance and Service Manual
Summary of Contents for Carryall 500
