TH82 Series Reference Manual
28/28
n=<*******0>B
Double-strike
mode
is
turned
off.
n=<*******1>B
Double-strike
mode
is
turned
on.
[DETAILES]
*
n
is valid only for the lowest bit.
*Printer output is all the same with emphasized mode.
[DEFAULT]
n=0 (double-strike mode off)
ESC J
Print and feed paper
[FORMAT]
<1B>H<4A>H<n>
[RANGE]
0
≦
n
≦
255
[FUNCTION]
Prints the data in the print buffer and feeds the paper [n x vertical or horizontal motion unit].
ESC L
Select page mode
[FORMAT]
<1B>H<4C>H
[FUNCTION]
Switches from standard mode to page mode.
[DETAILES]
*This command is enabled only when processed at the beginning of a line in standard mode.
*This command is ignored in page mode.
*The printer returns to standard mode after printing by
FF
is completed or by using
ESC S
.
*This command sets the position where data is buffered to the position specified by
ESC T
within
the printing area defined by
ESC W
.
*This command switches the setting for the following commands which have each value
independently in standard mode and page mode to those for page mode.
□
Set right-side character spacing:
ESC SP, FS S
□
Set default line spacing:
ESC 2
、
ESC 3
*Only setting is possible for the following commands in page mode.
①
ESC V
Turn 90
°
clockwise rotation mode on/off.
②
ESC a
Select justification.
③
ESC {
Turn upside-down printing mode on/off.
④
GS L
Set left margin.
⑤
GS W
Set printing area width
*The following command is not available in page mode.
①
FS p
Print NV bit image.
②
FS q
Define NV bit image.
③
FS g1
Write to NV user memory.
④
GS v 0
Print raster bit image.
*The printer returns to standard mode when
ESC @
is used.
ESC M
Select character font
[FORMAT]
<1B>H<4D>H<n>
[RANGE]
n=0,1,48,49
[FUNCTION]
Selects character fonts.
n Function
0,48 Font A (12 x 24) selected.
