TH82 Series Reference Manual
33/33
ESC c 3 Select paper sensor to output paper end signals
[FORMAT]
<1B>H<63>H<33>H<n>
[RANGE]
0
≦
n
≦
255
[FUNCTION]
Selects the paper sensor to output paper end signals.
BIT FUNCTION
HEX.
Paper roll near end sensor disabled
00
0
Paper roll near end sensor enabled.
01
Paper roll near end sensor disabled
00
1
Paper roll near end sensor enabled.
02
Paper roll end sensor disabled
00
2
Paper roll end sensor enabled.
04
Paper roll end sensor disabled
00
3
Paper roll end sensor enabled.
08
4 Undefined
-
5 Undefined
-
6 Undefined
-
7 Undefined
-
*Bit 0 and 1 are valid only on near-end sensor model.
[CAUTION]
*This command is effective only with a parallel interface and is ignored with a serial interface.
*It is possible to select multiple sensors to output signals. If multiple sensors are effective, the paper
end signal is output when any of the sensors detects a paper end.
*The paper end signal switching may be delayed depending on the receive buffer state because
sensor is switched when this command is executed.
*If either bit 0 or bit 1 is on, the paper roll near-end sensor is selected as the paper sensor which
outputs paper end signals. This function is valid only on model TH-80s.
*If either bit 2 or bit 3 is on, the paper roll end sensor is selected as the paper sensor which outputs
paper
end
signals.
*When all the sensors are disabled, the paper end signal always outputs a paper present status.
[DEFAULT]
n=1
This command is invalid.
