TH82 Series Reference Manual
14/14
5.3.3
POWER SUPPLY CONNECTOR
The connector is connected the printer to an external power source.
PIN SIGNAL
1
+24V
2
GND
3
NC
SHELL
F.G
2
3 1
SHELL
CONNECTOR MODEL:
Printer side:
Hosiden TCS7960-532010 or equivalent
User side:
Hosiden TCP8927-631100 or equivalent
Hosiden
TCP8927-531100
or
equivalent
5.3.4
DRAWER KICK-OUT CONNECTOR
The pulse specified by
ESC p
or
DLE DC4
is output to this connector. The HOST can confirm the
status of the input signal by using the
DLE EOT
,
GS a
, or
GS r
commands.
PIN I/O
DESCIPTION
1
- Frame
ground
2
Output
Drawer kick-out drive signal 1
3
Input Drawer
open/close
signal
4
Output
+24
V
5
Output
Drawer kick-out signal 2
※
6
- Signal
ground
※
Two drawers can be used with a Y-cable that meets the following specifications.
Pin 1: Frame ground --------------------------------------- ------------- Pin1
Pin 2: Drawer kick-out drive signal 1 -------------------------------- Pin2
Pin 3: Drawer open/close signal ---------------------------------------Pin3 Connector of Drawer No.1
Pin
4:+24V
----------------------------------------------------------------Pin4
Pin 5:Drawer kick-out signal 2 ------------------- ------Pin6
Pin
6:
Signal
ground
Pin6
----------
----------------------------Pin1
-----------------------Pin2
-----------------Pin3 Connector of Drawer No.2
------------Pin4
--------------------------------------Pin6
1 6
CONNECTIOR MODEL:
Printer side:
MOLEX52065-6615 or equivalent
Used
side:
6-position
6-contact
(RJ12
telephone
jack)
