TH82 Series Reference Manual
55/55
GS L
Sets left margin
[FORMAT]
<1D>H<4C>H<nL><nH>
[RANGE]
0
≦
nL
≦
255
0
≦
nH
≦
255
[FUNCTION]
*Sets the left margin specified by nL and nH.
*The left margin is set to [(nL + nH x 256) x horizontal motion unit].
Printable area
Left margin
Printing area width
[RANGE]
*This command is effective only when processed at the beginning of a line in standard mode.
*If this command is processed in page mode, the printer executes only internal flag operation.
*The setting of this command does not affect printing in page mode.
*The maximum left margin is the same area with the printable area in the horizontal direction. If the
setting exceeds the printing area, the maximum value of the printable area is used.
*The horizontal and vertical motion units are set by
GS P
. Even if the printer changes the horizontal
and vertical motion unit by
GS P
after setting the left margin, the current left margin remains
unchanged.
*The horizontal motion unit (
x
) is used for calculation of the left margin. The calculated result is
truncated to the minimum value of the mechanical pitch.
[DEFAULT]
nL=0
、
nH=0
