TH82 Series Reference Manual
53/53
GS :
Start/end macro definition
[FORMAT]
<1D>H<3A>H
[RANGE]
-
[FUNCTION]
Starts or ends macro definition.
[CAUTION]
*Macro definition is useful when the same contents need to be printed several times.
*Macro definition starts when this command is received during normal operation. Macro definition
ends when this command is received during macro definition.
*When
GS ^
is received during macro definition, the printer stops macro definition and clears the
definition.
*The default setting of macro is undefined.
*The contents of the macro definition are not cleared by
ESC @
.
*If the printer receives
GS :
again after receiving
GS :
, the macro definition returns to undefined
state.
GS B
Turn white/black reverse printing mode on/off
[FORMAT]
<1D>H<42>H<n>
[RANGE]
0
≦
n
≦
255
[FUNCTION]
*Turns white/black reverse printing mode on or off.
*When n=<*******0>B, white/black reverse mode is turned off.
*When
n=<*******1>B,
white/black reverse mode if turned on.
[DETAILES]
*Only the lowest bit of
n
is valid.
*This command is effective for built-in characters and download characters.
*This command is also applied to the right space amount of the character set by
ESC SP
.
*This command does not affect bit image, download bit image, bar code, HRI characters and
spacing
skipped
by
HT, ESC $
and
ESC
╲
.
*This command does not affect the space between lines.
*White/black reverse mode gives priory to underline mode. Thus, Even if underline mode is on, it is
not underlined on the white/black reverse characters. But, the setting of underline mode is not
cancelled.
[DEFAULT]
n=0
GS E
Select printing speed
[FORMAT]
<1D>H<45>H<n>
[RANGE]
0
≦
n
≦
255
[FUNCTION]
Selects printing speed
[CAUTION]
This command is effective only when processed at the beginning of a line.
Value
Bit Function
0 1
0 Undefined
Fixed
to
0
1 Undefined
Fixed
to
0
2 Undefined
Fixed
to
0
3 Undefined
Fixed
to
0
4 Printing
speed
High Low
5 Undefined
Fixed
to
0
6 Undefined
Fixed
to
0
7 Undefined
Fixed
to
0
This command is invalid.
