TH82 Series Reference Manual
54/54
GS H
Select printing position of HRI characters
[FORMAT]
<1D>H<48>H<n>
[RANGE]
0
≦
n
≦
3, 48
≦
n
≦
51
[FUNCTION]
*Selects the printing position of HRI characters when printing a bar code.
*
n
= 0,48:
Not printed.
*
n
= 1,49:
Above the bar code.
*
n
= 2,50:
Below the bar code.
*
n
= 3,51:
Above and below the bar code.
[DEFAULT]
n=0
GS I
Transmit printer ID
[FORMAT]
<1D>H<49>H<n>
[RANGE]
1
≦
n
≦
3, 49
≦
n
≦
51
[FUNCTION]
*Transmits the printer ID specified by
n
after executing this command.
n Printer
ID
Specification
1,49
Printer model ID
Depends on the model
2,50
Type ID
See below table
3,51
ROM version ID
Depends on the ROM version
*Type
ID
as
follows.
Value
Bit Function
0 1
0
Two byte character code Not supported
Supported
1 Autocutter
Not
equipped
Equipped
2 Undefined
Fixed
to
0.
3 Undefined
Fixed
to
0.
4 Undefined
Fixed
to
0.
5 Undefined
Fixed
to
0.
6 Undefined
Fixed
to
0.
7 Undefined
Fixed
to
0.
*When DTR/DSR control is selected, the printer transmits the printer ID after confirming that the
HOST is ready to receive data. If the HOST is not ready to receive data, the printer waits until the
HOST
is
ready.
*XON/XOFF control is selected, the printer transmits the printer ID continuously without
confirming that the HOST is ready to receive data.
