TH82 Series Reference Manual
49/49
FS
W Turn quadruple-size mode on/off for Kanji character
[FORMAT]
<1C>H<57>H<n>
[RANGE]
0
≦
n
≦
255
[FUNCTION]
*Turns quadruple-size mode on or off for Kanji characters specified by
n
.
Value
Bit Function
0 1
0 Quadruple
character OFF
ON
1 Undefined
-
-
2 Undefined
-
-
3 Undefined
-
-
4 Undefined
-
-
5 Undefined
-
-
6 Undefined
-
-
7 Undefined
-
-
[CAUTION]
*Only
the
lowest
bit
n
is valid
*Quadruple-size mode is the character which double-width and double-height modes are both
selected at the same time.
*When quadruple-size mode is turned off by this command, the following character are printed in
normal
size.
*If some of the different characters in height are on a line, all the characters on the line are aligned at
the baseline.
*When the size of the character is enlarged to the horizontal direction, it is enlarged to the right
based on the left side of the character.
*The setting of the last received command is effective although
FS !
can turn on or off
quadruple-size mode by selecting double-height and double-width modes. Thus, if the printer
cancels quadruple-size mode by
FS W
after specifies quadruple by
FS !
, it clears the setting of
FS !
.
FS
k
Select Kanji character font(Japanese model only)
[FORMAT]
<1C>H<6B>H<n>
[RANGE]
0
≦
n
≦
1
[FUNCTION]
*Selects Kanji character font specified by
n
.
Value
Bit Function
0 1
0 Selects
Kanji
font Mintyo Gothic
1 Undefined
-
-
2 Undefined
-
-
3 Undefined
-
-
4 Undefined
-
-
5 Undefined
-
-
6 Undefined
-
-
7 Undefined
-
-
[CAUTION]
*This command is ignored in the model with only one of the fonts.
*This command is valid only on Japanese models.
This command is invalid.
