Cloos QINEO, Operating Instructions Manual, Page: 87 / 186

87
Auto log off of configurator
Name Function
Off (default)
The user with the "Configurator" operating level is
not logged off automatically.
… min.
The user with the "Configurator" operating level
is logged off automatically after a preset time
(1min … 30min).
If no input is made via the operating module during the preset time
period, the access state is reset to the preset "Operating level after switch
on".
Input of password via keyboard
In this menu item you can select the following functions:
Name Function
Allowed (default)
The manual input of a 6-digit code number at the
welding power source is allowed.
Not allowed
The user can only log in to the welding power
source with a PAK.
10.6.2.1 Config - User management - Options
The following 3 functions refer to the "Automatic" operating level.
Save job
In this menu item you can select the following functions:
Name Function
Enable You can save jobs without login.
Lock
You can only save jobs after login with your password
or PAK.
INFO!
INFO!
Figure 44. User management - Options