Cloos QINEO, Operating Instructions Manual, Page: 152 / 186

152
No.
Error message on the
display
Possible cause Remedy
183
Operating module
- Maximum text
number in language file
exceeded
Language file version newer than
machine (not compatible with
software).
 Use other language file

Service
184
Operating module
- Invalid symbol in
language file Language file version newer than
machine (not compatible with
software).
 Use other language file

Service
185
Operating module -
RAM memory range for
language file exceeded Language file version newer than
machine (not compatible with
software).

Use other language file
 Service
186
Operating module - No
language found No language file available on
memory card.
 Load language file on the memory card.
 Service
187
Operating module -
Error when transmitting
the SD-Min-limit values
Operating module cannot call up
the information of the control.
 Switch machine Off and On
 Check cable connections
 Service
188
Operating module -
Error when transmitting
the SD-Max-limit values
Operating module cannot call up
the information of the control.

Switch machine Off and On

Check cable connections
 Service
189
No enable from control
computer Time of initialisation in control
computer exceeded (25 seconds).
 Switch machine Off and On
 Check software for compatibility

Service
190
Transmission error
logbook An SD module logbook could not be
transmitted correctly.

Check SD card in SD module

Check plug and connections
 Service
191
Unknown error in file
system
Access to SD card is not possible.
 Check SD card
 Check plug and connections

Service
192
Telegram subsequent
error
Error in data transfer.

Check SD card

Check plug and connections
 Service
193
Transmission error from
control computer
Error in data transfer.
 Check SD card
 Check plug and connections
 Service
194
Checksum error during
data receipt
Error in data transfer.
 Check job data and then save job again
 Service
195
Operating module -
Unknown machine type
Read error, old software.

Switch machine Off and On

Software update
 Service
196 Overflow - receive buffer Error in data transfer.
 Check SD card
 Check plug and connections

Service
197 Read error in file Error in data transfer.

Check SD card

Check plug and connections
 Service