CLIMET INSTRUMENTS CI-154 User Manual Download Page 97

Page: 97 / 98

EU Declaration of Conformity

Measurement, Control, Laboratory, and Industrial Equipment

EU Directives covered by this declaration:

2004/108/EC EMC Directive

2006/95/EC Low Voltage Directive

IEC 825 Safety of Laser Products

Product:

Laser Particle Counter
Model: CI-154

Standards Which Product Conforms To:

EN61326-1 (2006) Class A

EN61010-1 :2010

IEC 825

European Contact:

Mike LeGrys

Thermotron

3 Heard Way

Eurolink Industrial Estate

Sittingbourne

Kent ME10 3SA England

I, the undersigned, hereby declare that the equipment specified above conforms to
the directives and standards.

Place: Redlands, California USA
Date: April 28, 2014

David L. Chandler

Engineering Manager

Attention

The attention of the purchaser, installer or user is drawn to the special measures
and limitations which must be observed when the product is taken into service, in

order to maintain compliance with the above directives. Details of the special
measures and requirements are detailed in this product’s user manual.

Summary of Contents for CI-154



































































































Search results

Summary of Contents for CI-154

Reviews:

CLIMET INSTRUMENTS CI-154, User Manual, Page: 97 / 98

Search results

Summary of Contents for CI-154

Reviews: