CLIMET INSTRUMENTS CI-154, User Manual, Page: 39 / 98

CI-154 User’s Manual
Page 29
of the settings, to be kept with the data collected using a given program. The
printouts can also be used to see all settings at once, without having to go from
screen to screen on the display.
To print out the settings, press [
SET
-
UP
] from the main data screen, then press
[
SHOW SETTINGS
] from the following screen. From the next screen, press [
PRINT
]. Use
the [
EXIT
] keys to return to the main data screen.
2.13.3 Selecting data to report
The report menu screen is accessed by pressing [
REPORT
] from the main data screen.
The report menu has keys along the bottom to perform the following tasks:
 Clear data in memory
 Print the sample data currently on the main data screen
 Print all sample data currently stored in memory (a data dump)
 Print all data stored which violates alarm limits
 Print the average of the sample data stored in memory for each channel
 Print ISO 14644 (2015), Fed. Std. 209E, or GMP 2008 reports
The data that will appear in the reports can be restricted by enabling or disabling
the printout of data from specified channels. ISO/209E reports can be specified to
be based on 0.3 µm, 0.5
 m, 1.0  m and/or 5.0  m particle channels. The class can
be set for any of the available cleanroom classes by pressing [
SET CLASS
] and, in the
screen that follows, pressing the key for the desired class. The selected class will be
green.