CLIMET INSTRUMENTS CI-154, User Manual, Page: 25 / 98

CI-154 User’s Manual
Page 15
2.2.7 How to create and use location IDs
The location IDs are used to identify the location where the sample was taken. The
location ID is printed on
end of sample printouts and with data sent to a computer.
Location IDs must be used when doing FS-209E, ISO 14644–1, or GMP calculations.
ID names are entered on a keyboard that is accessed by pressing [
ID
] from the main
data screen and then pressing [
INSERT
]. Type in a name containing no more than 16
alphanumeric characters. When you press [
EXIT
] the new ID will be inserted above
the ID previously highlighted.
To select an ID, simply highlight the ID using the [
UP SELECT
] or [
DOWN SELECT
] keys
and then press [
EXIT
]. Use the [
PAGE UP
] or [
PAGE DOWN
] keys to scroll through the
saved IDs one screen at a time.
To delete an ID, highlight the ID and then press the [
DELETE
] key. You will be
prompted for confirmation that you want to delete that ID. An ID cannot be deleted
if any saved data is associated with the ID.
2.2.8 How to auto advance location IDs
After a list of ID’s has been entered, the user can chose to automatically advance to
the next location on the list. This is done by pressing the [
AUTO ADVANCE
] button to
enable it on the ID screen. Pressing [
TOP
] positions the cursor to the ID at the top of
the list. The behavior of the auto advance feature is designed to reduce the number
of key presses needed to take samples along a route of predetermined locations.
However, a sample may be terminated and retaken or a location can be skipped
along the route if necessary. The behavior is outlined below.
Condition Action Result
ID is selected by operator
and [
AUTO ADVANCE
] is not
enabled.
Press [
START
]. Unit starts sampling at
location where cursor is
positioned.
ID is selected by operator
and [
AUTO ADVANCE
] is
enabled.
Press [
START NEXT ID
]. Unit starts sampling at
location where cursor is
positioned.
Unit completes sampling a
location and [
AUTO
ADVANCE
] is enabled.
Press [
START NEXT ID
]. Unit starts sampling at
next location ID.
User wishes to interrupt
sample. Press [
STOP
]. Unit stops sampling.
[
AUTO ADVANCE
] is enabled
and user wishes to
resume sampling at next
location after interruption.
Press [
START NEXT ID
]. Sampling resumes at next
location.
[
AUTO ADVANCE
] is enabled
and user wishes to
resume sampling at a
location other than the
next location after
interruption.
User must move cursor
then select the location
desired for the next
sample. Then press [
EXIT
]
to exit the ID screen then
[
START NEXT ID
].
Sampling resumes at the
selected location.