Clevo M570TU, User Manual

Page: 151 / 246

Modules
Intel Turbo Memory Module 7 - 47
7
Intel Turbo Memory Module
If you have included an Intel Turbo Memory (Robson) NAND flash memory card
module in your purchase option, then you will need to enable the option in the BIOS
(see “Advanced Menu” on page 5 - 8 ) BEFORE installing the Windows Vista op-
erating system software (do not enable this option in Windows XP or on a Windows
Vista operating system that has been installed without the option enabled).
Intel Turbo Memory Technology (also known as Robson flash memory ) is an Intel
technology that reduces the time it takes for a computer to boot up, to load applica-
tions, and to write data to the hard drive.
Intel Turbo Memory Technology is sup-
ported in Windows Vista only (it also supports Windows Vista features such as
ReadyBoost, ReadyDrive, and Superfetch).
Intel Turbo Memory & Matrix Storage Setup and Driver Installation
1. Start-up the computer and press < F2 > to enter the BIOS (see “The Setup
Utility” on page 5 - 4 ).
2. Go to the Advanced menu, select “ Installed O/S ” and make sure “ Vista ” is
the selected option (see “Advanced Menu” on page 5 - 8 ).
3. Go to the “ SATA Mode Selection ” item and make sure “ AHCI ” is selected.
4. Go to the Boot menu (see “Boot Menu” on page 5 - 14 ).
5. Set the CD/DVD-ROM Drive (make sure the Microsoft Windows Vista OS
disc is inserted) as the first device in the boot order from the Boot priority
order menu.
e-SATA Port
Support
Note that the Intel Ma-
trix Storage driver is
required to support
the e-SATA port
even if
you have not included
an
Intel Turbo Memory
module in your pur-
chase configuration.
Follow the instructions
provided here in order to
install the driver.