Clevo M570TU, User Manual

Page: 86 / 246

BIOS Utilities
5 - 8 Advanced Menu
5
Advanced Menu
Installed O/S (Advanced Menu)
This setting tells the computer what kind of operating system you’re using. Make
sure you choose the correct setting for your O/S in order to prevent system problems.
Note: If you select the
Vista O/S then the SATA Mode Selection menu will become
available. If you are installing the Windows XP O/S make sure you have set the ap-
propriate operating system here in order to prevent system problems.
Figure 5 - 3
Advanced Menu
SATA Mode & e-Sata Port
You should select AHCI
mode in SATA Mode Se-
lection to support e-SATA
port hot-swapping in Win-
dows Vista (hot-swapping
is not supported in Win-
dows XP ).
Intel Turbo Memory
Select AHCI mode in Sata
Mode Selection if you
have included an Intel Tur-
bo Memory module in your
purchase configuration.
You should then enable
support for Intel Turbo
Memory from
DFOROM
(Robson) Support (see
page 5 - 11 ).
Main Advanced Security Boot Exit
F1
Help Select Item
-/+
Change Values
F9
Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Select the operating
system installed
on your system which
you will use most
commonly.
Note: An incorrect
setting can cause
some operating
systems to display
unexpected behavior.
Advanced
Phoenix SecureCore(tm) Setup Utility
Installed O/S: [ Vista ]
SATA Mode Selection: [AHCI]
Legacy USB Support: [Enabled]
Boot-time Diagnostic Screen: [Disabled]
FAN Control: [Automatics]
Power On Boot Beep [Disabled]
Legacy OS Boot: [Enabled]
Reset Configuration Data: [No]
Battery Low Alarm Beep: [Disabled]
DFOROM (Robson) Support: [Enabled]
is selected as the O/S.
Only available if Windows Vista