Clevo M570TU, User Manual

Page: 132 / 246

Modules
7 - 28 Trusted Platform Module
7
6. Use the arrow keys to select the TPM State menu.
7. Select TPM Function , and set the item to Enable .
8. Press F10 to save the changed BIOS information, exit the BIOS and restart the
computer.
9. Go to the Boot menu (see “Boot Menu” on page 5 - 14 ).
10. Set the CD/DVD-ROM Drive (make sure the Microsoft Windows Vista OS disc is
inserted) as the first device in the boot order from the Boot priority order menu.
11. Go to the Exit menu (see “Exit Menu” on page 5 - 15 ) and select “ Exit Saving
Changes ” (or press F10 and select “ Yes ” then press Enter) and press Enter to exit
the BIOS and reboot the computer.
12. When the computer restarts you will be prompted to choose your action; press
Enter and select “ Execute ” and then press F10 to save and restart the computer.
13. You will now need to install the Windows Vista operating system software
( Enterprise or Ultimate Edition) and partition the hard disk for Windows BitLocker
drive Encryption (see over).
Figure 7 - 20
BIOS TPM State
Menu
Phoenix SecureCore(tm) Setup Utility
Main Advanced Security Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Change TPM State
A disabled security
chip prevents encrypted
data from being used
A deactivated security
chip prevents a user
from taking ownership
TPM State
Current TPM State: UNKNOWN
TPM Function [ No Change ]
No Change
Enable
Disabled
Clear & Disabled