Clevo M570TU, User Manual

Page: 29 / 246

Quick Start Guide
Operating System Setup 1 - 7
1
Enabling Trusted Platform Module for Windows Vista
You can make use of the TPM function if you are using Windows Vista ( Enterprise or Ultimate edition) as your
operating system. To be able to use the TPM function in Windows Vista , you first need to enable TPM support
in BIOS as described below before installing Windows Vista . See “Trusted Platform Module” on page 7 - 26
for more details.
3. Go to the Security menu, select " TPM Support " and make sure the function is Enabled .
4. Go to the TPM State menu, select " Change TPM State " and make sure the function is also Enabled .
Figure 1 - 3
- BIOS Security Menu
5. Go to the Exit menu and select " Exit Saving Changes" (or press F10 and select " Yes " then press Enter ) and
press Enter to exit the BIOS and reboot the computer.
Phoenix SecureCore(tm) Setup Utility
Main Advanced Security Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Change TPM State
A disabled security
chip prevents encrypted
data from being used
A deactivated security
chip prevents a user
from taking ownership
TPM State
Current TPM State: UNKNOWN
TPM Function [ No Change ]
No Change
Enable
Disabled
Clear & Disabled
Main Advanced S Se ec cu ur ri it ty y Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Supervisor Password
controls access to the
setup utility.
Security
Phoenix SecureCore(tm) Setup Utility
Supervisor Password Is: Clear
User Password Is: Clear
Set Supervisor Password [ Enabled ]
Password on boot: [ Disabled ]
Fixed disk boot sector: [Normal]
TPM Support [Enabled]