84
P1934E/EN 2009-04
en03c381.fm, 23.04.2009
Programming
3
3.12
Administration
3.12.1
Administration / Load
c003
07
en
.bm
p
Fig. 3-42: Load / Save
load.txtS
From the load screen, the user can load/restore the parameters.
Before the parameters can be loaded from the storage medium, the user must first analyze the
parameter file and read out the information for the stored tools. The user can select the desired
parameters by pressing the
Analyze file
softkey; then,the list of the available tools is displayed
under
Tool Configuration
.
The user can select one or more tools in the list, and only the parameters from these tool(s) are
loaded.
Inputs and Outputs are always loaded as a whole, regardless of which tools are selected.
The configurations of
Communication/Ethernet
,
Communication/Gateways
and
Administration/
Password
are always loaded from the storage medium along with the tool parameters.
The
Load settings
<F3> softkey loads the parameters of the selected tools.
NOTE
The selected Application/Tightening group number in the Run Screen
is loaded together with the tool parameters.
load.txtE
