Cleaver-Brooks ClearFire CFLC Series, Operation And Maintenance Manual, Page: 242 / 290

Falcon Lead Lag Appendix E
E-34
Figure 22 - Aux 1 Pump
Auxiliary 1 pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on
Pump exercise settings apply to all
pumps
Pump exercise interval
Pump exercise time
*Inhibit pump for burner fault or disable
Miscellaneous
Auxiliary 1 pump
Pump control
Pump output
Pump start delay
Overrun time
Logout
Advanced
Settings>>
Use for local (Stand-alone) demands
Use for Lead Lag Master demands
Pump Configuration
Auxiliary 1 pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on Force off Misce
Central Heat:
DHW:
Local Lead Lag:
Frost Protection:
Aux pump:
Local burner demand*
Demand*
Demand*
Pump demand
Central Heat
X is set
Z is set
Y is set
Service active*
Service active*
Service active*
DHW
*This setting may be inhibited due
to burner fault or disable
Auxiliary 1 pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on
Force off
Misce
*This setting may be inhibited due
to burner fault or disable
Force pump on when:
Local burner demand*
Outlet high limit
Lead Lag slave demand
Auxiliary 1 pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on
Force off
Misce
*This setting may be inhibited due
to burner fault or disable
Force pump off when:
DHW priority is active
DHW high limit
CH anti-condensation
DHW anti-condensation
Pump C
0 sec
5 min 30 sec
Auto
0
AUX 1
PUMP
Isolation valve
(LL Slave)