ClearView PTZ Series Quick Start Manual Download Page 42

Page: 42 / 146

Important Safeguards and Warnings

᧪

Electrical safety

All installation and operation here should conform to your local electrical safety codes.

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

We are not liable for any problems caused by unauthorized modification or attempted repair.

᧪

Installation

Please note current product does not have the power button. Please unplug all concerning power cable

before your installation or any maintenance work.

Do not apply power to the IP camera before completing installation.

Do not put object on the IP module.

᧪

Environment

This series IP camera should be installed in a cool, dry place away from direct sunlight or strong light,

inflammable, explosive substances and etc.

4. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance

work.

Use the dry soft cloth to clean the device.

If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean

the device. Finally use the dry cloth to clean the device.

Please open the accessory bag to check the items one by one in accordance with the list below.

Contact your local retailer ASAP if something is missing or damaged in the bag.

Name

Amount

IPC 1

5V power adapter

MD9M data converter cable

Wall mount bracket

3G or WIFI antenna

For 3G or WIFI

series product only

˅˅

Quick Start Guide

CD 1

Summary of Contents for PTZ Series



















































































































































Search results

Summary of Contents for PTZ Series

Reviews:

Related manuals for PTZ Series

Brands by name

Popular brands

ClearView PTZ Series, Quick Start Manual

Search results

Summary of Contents for PTZ Series

Reviews:

Related manuals for PTZ Series

Brands by name

Popular brands