ClearView PTZ Series, Quick Start Manual

Page: 23 / 146

1
*HQHUDO,QWURGXFWLRQ
)URQW3DQHO
You can refer to the following figure for IP camera front panel information. See Figure 1-1
.
Figure 1-1
Please refer to the following sheet for detailed information.
Port Port Name Function
Port 1 POWER
Power indication light.
When system is recording, the green light flashes. The interval is 0.5s.
When system is running:
The red light becomes on when system boots up.
When system is running properly, the green light becomes on.
When system is upgrading, the red light flashes. The interval is 0.5s.
Port 2
PIR receiver
enclosure Passive IR motion detect port. It can detect the object of the IR radiant
(such as the human body or other heating object.)
Port 3
LDR(light
dependent
resistor)
It is to sense the environment illumination to open/close the IR light.
Port 4
/
Device lens.
Port 5 IR light
It is to send out the IR compensation light to enhance the night vision
effect.