ClearView PTZ Series, Quick Start Manual

Page: 53 / 146

10
Port Port Name Function
Port 6
IR remote
control signal
receiver
It is to receive the IR remote control signal. Current device does not
support this function.
Port 7 NETWORK
Network status indication light. It becomes red when network
connection is OK.
Port 8
Micro phone
port
The audio input of the bidirectional talk.
5HDU3DQHO
This series IPC rear panel is shown as in Figure 2-2.
Figure 2-2
Please refer to the following sheet for detailed information.
Port Name Function
I/O
Connect to MD9M data converter cable or
wireless alarm box.
Antenna Connect to the wireless antenna to receive
the WIFI, 3G and etc wireless signal.
RESET When the device is running properly (The
power indication light is green), press
REEST button for at least 5 seconds and
then release, you can reboot the device.
DC 5V
Power port. Input 5V DC
AUDIO IN Audio input 3.5mm JACK port. Input audio signal. Receive signals from
devices such as pick-up.