ClearView PTZ Series Quick Start Manual Download Page 21

Page: 21 / 146

Welcome

Thank you for purchasing our home use IP camera!

This quick start guide is designed to be a reference tool for your system.

Please keep this start guide well for future reference.

Please open the accessory bag to check the items one by one in accordance with the list below.

Contact your local retailer ASAP if something is missing or damaged in the bag.

Before your operation please read the following instructions carefully.

Operation Notice

Current series IPC has no power button. Please unplug all corresponding power cables

before your installation.

Please unplug the power cable before you replace the card.

Please unplug all the cables and then contact your local retailer once any abnormal

event occurs (such as there is smoke).

Installation Environment

All installation and operation here should conform to your local electrical safety codes.

The device working environment shall conform to the specified temperature and humidity

Please make sure the device is away from the direct sunlight or other heating sources.

Please keep the sound ventilation.

Please refer to

the packing list in the box *

Name

Amount

IPC 1

5V power adapter

MD9M data converter cable

Wall mount bracket

3G or WIFI antenna

For 3G or

WIFI series product only

˅˅

Quick Start Guide

CD 1

Daily Maintenance

Please use the dry cloth to clean the device regularly. Or you can use a mild detergent

and wipe gently in case there is too much dust. Do not use alcohol, benzene or other

volatility liquid to clean the device. It may result in surface damage.

Important

We assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

Summary of Contents for PTZ Series



















































































































































Search results

Summary of Contents for PTZ Series

Reviews:

Related manuals for PTZ Series

Brands by name

Popular brands

ClearView PTZ Series, Quick Start Manual

Search results

Summary of Contents for PTZ Series

Reviews:

Related manuals for PTZ Series

Brands by name

Popular brands