7
CLEARSPAN
™
CEDAR GREENHOUSES
Revision date: 06.16.09
3
NOTE:
Brace panels during
assembly, if needed.
INSTALL SIDE PANELS
WARNING:
To prevent damage to the
panels and to prevent serious personal
injury,
do not attempt to install the panels
on windy days
.
Beginning at the corner, attach a side panel
1.
to the back end panel using three 2-1/2"
construction screws (#FAS13).
NOTE: Drill and countersink all mounting
holes for panel installation.
Install
construction screws through the end panel
and into the side panel as shown below.
Secure side panels (#CG96113) to the
2.
base frame using 3/4" Phillips head screws
(FAF25P). Attach to the base frame using the pass-thru connectors as shown. Align the centers of the
pass-thru connectors with the edge of the side panels as shown to the right, and secure using 3/4"
Phillips head screws.
Repeat steps to install panels for the remaining side.
3.
View as seen
from the outside.
2
ATTENTION:
Verify that
all pre-installed brackets
are to the inside of the
greenhouse.
1
FAS13 Construction
screw locations
Frame length of your
building may differ
from what is shown.
