10
Operation
KS 1100 -
Englisch
Waste box emptying
The waste box is used to collect all
sweeped wastes. It can be found at the
back of the machine.
☞
The Waste box / hopper must be
emptied regularly but latest after
each use.
Manual Emptying of the Waste Box
• Turn upwards both steel swivelcat-
ches which release the waste box.
They can be found on both sides
foteh waste box.
• Pull out the waste box along the
rails, by pulling upwards and holding
the handle of the waste box.
• The waste box can easily be removed
and put back inside the machine
again.
• Pull out the waste box completely.
• To empty the waste box grab inside
the grip of the handle.
Insertion of the waste box
• Place the waste box in front of the
entrance of the waste box opening
at the back of the Ride-on-Sweeper.
• Lift the waste box to the height where
it can enter the opening to the
guiding rails.
• Slide the waste box inside again
• As soon as the waste box is
completely inside the machine the
steel-swivel catches can easily be
moved downwards to lock position.
Hydraulic Overhead Waste Emptying
• When the waste box is full or ready for
emptying proceed according to the
Stepps 1 to 4 at the switches:
• First switch on the ON/OFF switch for
overhead waste box emptying.
• Then tip the rocker switch to Pos.1
(lift the waste box) and then let go
the rocker switch to middle position,
i.e. „hold“
• Now drive the Ride-on-Sweeper to
the foreseen waste container, close
enough backwards so that the
waste box is above the open waste
container.
• Pull the handhold for buckling (2)
• Push the handhold back to the home
position (3)
• Now you can press the rocker
switch „lower waste box“, pos.4.
Switch lifting / lowering
2-handhold for
buckling
1
0
ON
OFF
ON
OFF
ON
OFF
I
OII
