20
• Charge the battery
• Check the machine for visible damage or functional errors
• Check the state of the lamella-filter and clean it
• Empty the waste box (hopper)
Additionally every 50 Operation hours
• Clean and grease the battery terminals/poles.
• Check the condition of the Gel-wheels.
• Check the Cylindrical brush and see if worn out or if clogged by waste parts. If
necessary exchange the Cylindrical brush.
• Check the working height and cleaning range of the brushes. If necessary adjust.
• Check the Side brushes and see if worn out or if clogged. If necessary replace or
readjust.
• Check the cylindrical brush tunnel for stuck waste parts or clogged up dirt, which
narrow the brush tunnel and constraint the free movement of the cylindrical
brush.
Additionally every 100 Operation hours
• Check the cable insulation. If necessary replace the cable.
• Check that the cable connection is properly fixed.
• Grease the steering chain.
• Grease the drive chain of the Cylindrical brush.
• Check the brake tension, if necessary replace.
• Check the vacuum suction for foreign particles / dirt and clean.
• Test drive to check the functionability of all operational elements and controls
(switches, levers, pedals, steering, brushes etc.)
• Check the Cylindrical brush if functions are out of tolerance (expansion/strain).
• Check the state of wear and tear of all bearings.
Additionally every 200 Operation hours
• Check the functionability of the electric motor.
• Check the wear and tear of the carbon brushes and if necessary, replace.
• Check the steering and it‘s play/clearance. If necessary retension the chain.
• Check all electronic parts to see if dusty or dirty and vacuum clean.
Maintenance Table
Daily Maintenance
KS 1100 -
Englisch
