13
the counter flange coming from the
side brush motor and is fixed tightly.
Side brushes adjustment
Due to wear and tear of the side brushes‘
bristles and the change in floor contact
height, it is necessary to readjust the side
brushes height from time to time.
• Turn-Off / Switch off the Ride-on-
Sweeper.
• Release the levers for both side
brushes and push them downwards.
• The side brushes are each fixed by
means of two supports. The right
support (bowden cable) is to lift or
lower the side brushes, the left sup-
port (butterfly handle screw) is used
to readjust the height of the brushes.
Maintenance and Service
Side brushes
Side brushes exchange
Removal of the side brushes
• Switch off of the Ride-on-Sweeper.
• Pull the levers of the side brushes
upwards.
• Locate both levers in their positions.
• Lift the side brush motor upwards in
order to get better access to the side
brushes.
• Unscrew the three fixation screws in
the centre of each side brush.
• Pull downwards each side brush.
• Replace the side brushes.
Mounting the Side Brushes
• Turn the 3 screw holes of the flange
plate of the side brushes exactly over
the position of the 3 holes of the
counter flange on the side-brush-
motor.
• Screw the three fixation screws in the
centre of the side brush that it con-
nects and lifts the brush upwards to
Counter flange
for side brush
Flange plate for
side brushe
Fixation screws
brush
KS 1100 -
Englisch
Spring for constant pressure
Butterfly nut and
hexagon Screw
M10 (height
Adjustment of
the side brushes)
