7
Operation
Safety instructions
The Ride-on-Sweeper can only be used
by reliable persons. Only trained and well
instructed persons shall be used. The
responsibilities must be clearly fixed.
Always check the Ride-On-Sweeper
before any drive and test the
functionability.and technical safety.
Do not use the machine if it should have a
defect. Only drive on the tracks and areas
which are strictly assigned for the Ride-
on-Sweeper. The Ride-On-Sweeper is
strictly designed for only one person to
use. The transportation of more than one
person is strictly forbidden.
Adjustment of the driver seat
Undo the seat fixation and move the
driver seat on the it‘s seat console until
you have found the suitable sitting
position.
Drive operation / Starting
the Sweeper
• Seat yourself on the drivers seat.
The Ride-on-Sweeper cannot be put
☞
into operation, if the drivers seat is
not exposed to weight pressure to
switch the contact.
• Check the position of the switch of
the lever on the operator panel.
• The Filter cleaning switch must be
in OFF (AUS) position.
•
The red Main Switch must be in ON
(EIN) position.
• The Key switch must be ON
• Check the battery charge status- -
indication on the operator panel.
The luminious LED‘s shine in sequen-
ce and then show the effective char-
ging status of the batteries.
• Press the brake.
• Release the emergency-brake fixation
(next to the brake)
- Driving forwards:
•
Move the lever switch to the front for
actuation „drive forwards“. Only when
☞
the accelerator has been pressed
down, then the Ride-on- Sweeper will
start driving.
- Driving backwards:
•
Move the lever switch to the back for
actuation „drive backwards“. Only
☞
when the accelerator has been
pressed down, then the Ride-on-
Sweeper will go backwards.
An acoustic signal is optional
• The speed of the Ride-on-Sweeper
can be chosen variably when
☞
pressing down the accelerator.
1
0
ON
OFF
ON
OFF
ON
OFF
Sw
iss Made Qu
ality
.
Brake pedal
Brake fixation
Accelerator
Light switch
Horn
Lever:
forward/backwards
KS 1100 -
Englisch
