Claydon HYBRID MOUNTED, Operator'S Manual

Page: 29 / 51

29
E
IN FIELD OPERATION
OPERATORS MANUAL - HYBRID MOUNTED
CALIBRATING THE DRILL
Prior to explaining the calibration process an overview of the metering units highlighting the various
components can be seen in the photo below.
1. Hopper emptying flap.
2. Slider adjusting handle
3. Magnet wheel for shaft speed sensor
4. Shaft speed sensor
5. Calibration button
6.
Calibration flap and pin
7. Seed shut off slide
1. Red gear should always remain in the
closed position (high gear)
2. Lid for emptying large amounts of
product and cleaning metering wheel
3. Outlet for emptying smaller amounts
of product (e.g. OSR/microfertiliser)