Claydon HYBRID MOUNTED, Operator'S Manual

Page: 33 / 51

33
E
IN FIELD OPERATION
OPERATORS MANUAL - HYBRID MOUNTED
7
Enter the weight from the scales
(Step 5). Press
Note: When entering the
weight data we recommend
to use all 3 decimal places for
input after the decimal point
if possible. If the weighing
scales only use 2 decimal
places this will suffice.
8
After pressing ‘OK’ this screen
should appear. It shows the Error
percentage between calculated,
Cal factor and actual Cal factor.
(KG/ Rev) Press ‘OK’ the drill
is now calibrated. On the first
calibration this percentage can
be quite large. This is why it is
important to calibrate the machine
at least three times . At the end
of the third time the percentage
should be no more than 0.5% to
1%.
9
Follow steps 1 - 8 a further
3 times to gain an accurate
calibration setting on the drill.
When finished stow scales safely
away and re-attach the elbow as
shown in the photo.