Claydon HYBRID MOUNTED, Operator'S Manual

Page: 24 / 51

E
IN FIELD OPERATION
24 OPERATORS MANUAL - HYBRID MOUNTED
1. Remove pin to alter angle of ski boards
2. Rear tool bar
3. Remove pin to adjust height of green tines
4. Connecting arm for double tool bar
5. Remove pin to alter angle of green tines
The level board height is altered on the adjuster located on the swivel beams (as shown below). The
levelling boards can be lifted completely out of work with this adjuster or have some downward pressure
applied to them. Depending on the field conditions the following Ski board settings are recommended and
should be achieved using the adjuster:
• Wet conditions - Remove pressure from ski boards
• Dry conditions - Apply pressure to level boards
• Ideal conditions - Zero pressure (top link becomes loose during work)
1. Level board adjuster
LEVEL BOARDS AND TINES ADJUSTMENT SETTINGS
Note: Standard settings shown