Claydon HYBRID MOUNTED, Operator'S Manual

Page: 42 / 51

F
CARE AND MAINTENANCE
42 OPERATORS MANUAL - HYBRID MOUNTED
To change the front tine, simply remove the lynch pin and remove the 19mm pin, slide the entire tine out
and replace the entire tine with a new one. Refit pin and lynch pin.
When new, the steel of the tine protrudes beyond the Tungsten, this is to protect the Tungsten when
transporting new drills. After use the drill should be placed on wooden boards to protect the Tungsten.
Great care needs to be taken when lowering the drills onto concrete.
On the seeding leg, hook the removal tool (supplied) over the top of the share and push the pin down, hit
the top with a hammer to remove the share. Now simply slide the new share up the speed-Loc adaptor
and hit the bottom with a hammer until the locking pin pushes back out.
CHANGING WEARING PARTS
CHANGING SHARES
IMPORTANT
IF WORK IS REQUIRED TO BE CARRIED OUT WHILST
THE DRILL IS RAISED, ENSURE A SUBSTANTIAL PROP IS
POSITIONED SAFELY UNDER THE DRILL PREVENTING
IT FALLING UNDER ITS OWN WEIGHT.
EYE PROTECTION AND GLOVES MUST BE WORN