Clarion NX404AU Owner'S Manual Download

Page: 86 / 120

5.3.2 Customise Quick menu

The content of the Quick menu (page 19) is fully customisable. Tap the button you want to change,

and select its new function from the list.
The list of available functions and their descriptions are on page 19.

5.3.3 Route settings

These settings determine how routes will be calculated.

Button

Description

On-road navigation creates a turn by turn itinerary using the road network on the

map. Switch to off-road navigation to navigate between destinations in a straight

line.

The route calculation can be optimised for different situations and vehicle types

by changing the planning method. See below for details.

If the selected routing method is not Green, you can have your route compared

to the best green alternative on the screen when confirming the route. If this

alternative is much better than the selected method, you can quickly switch to

Green mode.

To let the route fit your needs, you can also set which road types are to be considered for or to be

excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your

destination can only be accessed using some of the excluded road types, they will be used but only

as much as necessary. In this case a warning icon will be shown on the My Route screen, and the

part of the route not matching your preference will be displayed in a different colour on the map.
In the list of road types you can see in how many segments and what total length of the road type is

used in the current route.

Button

Description

You might need to avoid motorways when you are driving a slow car or you are

towing another vehicle.

Charge roads are pay roads where you can purchase a pass or vignette to use

the road for a longer period of time. They can be enabled or disabled separately

from toll roads.

Clarion Mobile Map includes toll roads (pay roads where there is a per-use

charge) in the routes by default. If you disable toll roads, Clarion Mobile Map

plans the best toll-free route.

Clarion Mobile Map includes ferries in a planned route by default. However, a

map does not necessarily contain information about the accessibility of

temporary ferries. You might also need to pay a fare on ferries.

4WD tracks are dirt roads in very poor condition. They can only be driven by

4WD vehicles.Clarion Mobile Map excludes 4WD tracks by default.

86 NX404AU English

Summary of Contents for NX404AU

























































































































Search results

Summary of Contents for NX404AU

Reviews:

Related manuals for NX404AU

Brands by name

Popular brands

Clarion NX404AU, Owner'S Manual

Search results

Summary of Contents for NX404AU

Reviews:

Related manuals for NX404AU

Brands by name

Popular brands