Clarion ClarionMind NR1UB Owner'S Manual Download Page 18

Page: 18 / 147

Chapter 1 Preface

NR1UB/NR1UW/NR1UR

1-6
Start Up and Shutdown

1-6-1
Start Up

Press the power button to start up the unit. After

a short while, the Home screen will appear on
the display.

The screen shown above appears when you are

using the unit in its portable configuration. This

is called the Mobile mode.

NOTE

The first time you start up the unit, a screen will
appear for configuring date, time, and language
settings.

Be sure to check and set the current date and
time the first time you start up the application.

For details about date and time settings, see
7-3

Date and Time

(P. 108) in the Control

Panel.

For details about the language setting, see 7-6

Language

(P. 111) in Control Panel.

1-6-2
Shutdown

Hold down the power button for about four

seconds to shut down the unit.

This will shut down the unit and turn off power.

NOTE

Pressing the power button momentarily (less
than four seconds) while the unit is on will enter
the standby mode.

1-7
Using the Unit Mounted
on the Standard Cradle

You can mount the unit onto the supplied
standard cradle for use within a motor vehicle.

Mounting the unit onto the standard cradle

automatically starts up the navigation
application and switches the Home screen to

the Car mode. Note that the applications and

functions available for use are limited by law
while the ClarionMiND is in the standard cradle

in accordance with motor vehicle safety

guidelines.

See

How to mount the unit onto the standard

cradle

(P. 130) for information on how to mount

the unit onto the standard cradle.

1-7-1
Differences from the Mobile Mode

Mounting the unit onto the standard cradle will

cause the unit to operate differently from it does

in the Mobile mode as described below.

•

The unit will switch automatically to the Home
screen in the Car mode.

•

Supported applications are Navigation,
MySpace, News, Weather, Contacts,
RealPlayer, Control Panel, Connection, and
Portal Sync only.

NOTE

When in the standard cradle, movies cannot be
played with RealPlayer. Also, use of any
functions related to e-mail and the Browser is
not supported.

Summary of Contents for ClarionMind NR1UB



















































































































































Search results

Summary of Contents for ClarionMind NR1UB

Reviews:

Related manuals for ClarionMind NR1UB

Brands by name

Popular brands

Clarion ClarionMind NR1UB, Owner'S Manual

Search results

Summary of Contents for ClarionMind NR1UB

Reviews:

Related manuals for ClarionMind NR1UB

Brands by name

Popular brands